← Back to Respiratory
BiPAP

BiPAP

BiPAP (Bilevel Positive Airway Pressure) therapy delivers two distinct pressure levels — a higher pressure during inhalation and a lower pressure during exhalation — making it more comfortable than CPAP for patients who require higher pressure settings or who have difficulty exhaling against continuous pressure. It is commonly prescribed for obstructive sleep apnea, COPD, respiratory failure, and neuromuscular conditions affecting breathing.

BiPAP machines are available with a range of mask interfaces, humidifiers, and data-tracking capabilities. OxyCare supplies BiPAP equipment along with all compatible masks, tubing, headgear, and accessories, and coordinates setup and follow-up. Rental is available for qualifying patients.

Operating Instructions

Emergency telephone number is on your equipment. Call (618)234-0202.

Please follow instructions given by the equipment technician. Please follow your doctor's orders. CPAP/BiPAP must be ordered by a doctor.

CPAP/BiPAP Level ________________________ Mask Size __________ Spacer size_________

Frequency _________________________________.

Set-up

  1. Plug unit into grounded wall outlet.
  2. Connect large bore tubing to machine.
  3. Connect large bore tubing to mask.
  4. Place spacer on mask if ordered.
  5. Connect humidifier to CPAP/BiPAP if ordered.
  6. Connect headgear to mask and exhalation valve if required.
  7. Set prescribed rate(s).
  8. Demonstrate how to place mask and headgear on patient.
  9. Patient/Caregiver demonstrates each step and has a solid understanding.
  10. Review how to order supplies. When to order. Where to call.

Cleaning

  • Clean mask daily with soft cloth and mild detergent. Rinse well.
  • Empty humidifier (if ordered) of water each day, and refill with distilled water prior to use.
  • Once a week, wash large bore tubing, humidifier and mask in mild detergent and water then rinse well.
  • Once a month, after weekly cleaning, soak large bore tubing, humidifier and mask in vinegar and water solution. Soak for 30 minutes in a mixture of (1 part white vinegar and 4 parts water). Rinse well.
  • Reconnect to machine and turn power on to blow dry equipment for 30 minutes.
  • Head gear, black mesh filter, and chinstrap should be cleaned as needed in mild detergent and water then rinsed well. These items need to be air-dried completely before using.
  • Change white filter monthly.

Safety

  • Do not use extension cords.
  • Do not use another appliance in the same outlet.
  • Grounded outlets are recommended by the manufacturer.
  • Have a trained electrician assure your electrical safety.
  • It is recommended that the unit be checked on an annual basis.

OxyCare Medical Supply Co. 2725 South Belt West, Belleville IL 62226